Announcement

Collapse
No announcement yet.

NO-IP Complete Guide - Create a no-ip for ur server files and one for ur website

Collapse

728x90 top

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • NO-IP Complete Guide - Create a no-ip for ur server files and one for ur website

    [ALL MY UPDATED GUIDES CAN BE FOUND AT http://coldpowermu.sytes.net/ - I STRONGLY RECOMMEND YOU TO USE THE GUIDE FROM THE WEBSITE I GIVE YOU]


    Hello People! In this guide i will show you how to use No-IP Service - Tested and 100% works.

    ALL CREDITS FOR THIS GUIDE GO TO SYSTEMOUS!

    First of all, we must understand what No-IP Service does! No-IP is a service which gives us the opportunity to create a "link" which actually is our real IP! Using No-IP we can replace our real IP with the "link" we created! This is great cause after a reconnection of our internet connection, we don't have to change our IP in the MU Server Files or in the Webserver Files! We just need to update the No-IP and after that our Servers are ready to start!

    If you didn't understand a lot now, after the use of No-IP Guide you will see what is going on!

    OK let's move to the No-IP Website :

    http://www.no-ip.com/

    Once you are in the website, you have to register! Create an account and log-in! [The registration is too simple]

    Now, once you are in your account, on the left side the first category says "Hosts / Redirects"! We are going to create 2 No-IPS! The one will replace our real IP which we are going to use in our Server Files and the other No-IP will replace our IP link for our Server Website! [The Website No-IP will also mask (hide) the real IP]

    Press Add!

    Write a Hostname! The Hostname must be short in order to be accepted by the MU Server Files! A No-IP like myserver1111.servehttp.com is too long and it is not going to work!

    So you can write something like that : ip94.no-ip.biz [ This is going to work]!

    As for the host type let it as it is to DNS Host (A)! Now press Create Host and our Server Files No-IP is ready!

    Now let's create a masked No-IP for our website! Again press Add! Give a hostname! The hostname here can be as long as you want, like : myserverwebsite.servehttp.com

    As for the Host Type choose "Port 80 Redirect"! Wait 1 second in order the site to be refreshed, and after that you will see a new field called Port! There you have to add the port which from which people will get access to your website! to visit your website! The most common port is 8080!

    Once you added the port, check the "Mask URL" and Create Host!

    Now your 2 No-IPS are ready! How to use them?

    Download the file below : [It is the No-IP Duc 2.2.1 Application which we can use to update the No-IPS when the internet connection reconnects and we can a new IP - When the real IP Changes]

    DOWNLOAD : Download the application from the official website!

    Install No-IP Duc [The Installation is too Simple]! After the installation, start the program and write your username and your password [The ones you used in the Website] and log-in! Then you will see the 2 IPS you created earlier!

    [YOU ONLY NEED TO USE THIS PROGRAM, IF YOU RECONNECTED AND YOU GET ANOTHER REAL IP! ONCE YOU HAVE A NEW IP, THE NO-IPS CAN'T WORK UNLESS THEY ARE UPDATED! IN ORDER TO UPDATE THEM, JUST CHECK THE LITTLE SQUARE NEXT TO THE NO-IPS AND AFTER 3 SECONDS UNCHECK THEM! - AND IT IS BETTER TO LET THE PROGRAM OPEN]

    Now copy the first No-IP we created and paste it everywhere in the MU Server Files! Once you did that, your Server is ready!

    Copy the second No-IP we create and paste it everywhere in the Website Files! [DO NOT FORGET ALSO TO CHANGE THE PORT IN THE WEBSERVER FILES YOU ARE USING]

    If you did everything i mentioned above, you MU Server and your Website Server are ready!

    ALL CREDITS FOR THIS GUIDE GO TO SYSTEMOUS!

  • systemous
    replied
    sorry again but the website changed again! check here : http://sworld.sytes.net/

    Leave a comment:

728x90 bottom

Collapse
Working...
X